97 Sunbird Neptune w/90hp johnson

[milliejack]

Looking for a way to remove the oil reservior because it does not work properly. We currently mix all gas/oil at 50:1 manually. Also looking for a good place to install water/fuel separator. Any suggestions?

 

[tashasdaddy]

Re: 97 Sunbird Neptune w/90hp johnson

did you unplug the wiring harness on the oil tank, and the harness on the vro pump. cut the oil hose close to the motor, block with a bolt or plug, and hose clamp. take the oil tank out. i like my separator in the splash well if there is room. that way when changing filter, no gas gets sloshed in the boat.

 

[milliejack]

Re: 97 Sunbird Neptune w/90hp johnson

Thanks for the help. I will give it a go and the splash well has room for the separator.