95 Trophy navigation toggle switches

[alamos]

How the hxxx do I remove the big toggle switch heads for replacement?

They obviously come off somehow so the switches can be pulled out on the back side of the switch plate. I don't want to break one first to experiment. Thanks in advance for the directions!

 

[Frozen]

Re: 95 Trophy navigation toggle switches

Not sure on your exact toggle type, a pic would help. But it the toggle is circular the head probably screws off.

Like theses

If the toggle is flat and rectangle they have to tabs on the back that you push in the the switch comes out from the front. But I call this type of switch a rocker instead of a toggle.

Like these

 

[alamos]

Re: 95 Trophy navigation toggle switches

Thanks Cadet! A picture of the switches is attached.
It must have some type of flange under the overly large head that needs to be squeezed or pried. It's difficult to see under the head. Anyone that has dealt with one of these I would really appreciate knowing the trick to remove. Also,
if anyone knows where I can get new ones please let me know. Much appreciated!

 

[alamos]

Re: 95 Trophy navigation toggle switches

Update to 95 Bayliner Trophy navigation rocker switches-removal or replacement info:
Shut off or disconnect your battery power first so you don't short anything out.
Remove the switch panel screws (I had 4) and lift up to access the underside. There should be enough slack when you lift the panel up to view the switches. They are each held in the panel by 2 pressure tabs that you must sqeeze and then pull gently on the switch head to remove. Pull off the wiring connecters and mark the wires per switch if
removing so everything goes back together properly.

There were 2 types of rocker swithes that I removed:
single rocker on/off (part number C1423EAAAA 74 16amp 24V)
single rocker on/off return for horn (part number C1424EAAAA 24 16 amp 24V)
There was no info for manufactuer etc. so if anyone knows who makes these rocker switces please let us know