capristang
Recruit
Thread starter- Joined
- Aug 12, 2005
- Messages
- 1
hey all, first post.<br />the problem i'm having started when i noticed three of my trim housing bolts where snapped off.<br />i pulled all five out and replaced them, now my trim/ tilt will not go up. the pump runs but i'm not getting any pressure out either of my up lines. so my boat mechanic friend and i pulled out the trim cylinder piston and replaced the o ring, put it back together, filled up the resevoir and it still will not go up. The motor will come down after being lifted and the cylinders finally fill, but doesn't have pressure to lift motor. everythimg was working before bolts were replaced. please help.