92 120 force no spark help

[hunter70]

i have a 92 120 force out board motor has low hours hasnt been run in two months now it turns over good gets fuel but will not start no fire to the plugs its a 4 cylinder theres a sqaure box on the badriver side of motor with 4 wires has a geel bachside u can see true could this be the problem or stater under flywheel thanks

 

[roscoe]

Re: 92 120 force no spark help

Welcome to iboats hunter.

The problem could be many things.
Replacing expensive parts like voltage rectifiers and stators, cd modules, triggers, switchbox, coils, etc will empty your bank account.

The part you should buy first.... is a Clymer Force repair manual.

The voltage rectifier is likely NOT the problem.
It could be the stator, possibly the trigger, or just a loose/corroded wire somewhere.
It could also be the safety kill switch, or the ignition switch.

Too many things to start guessing at and replacing parts.
You must systematically troubleshoot the problem.