FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Should a 2.3 hp OMC be putting out cooling water, at low to very low speed? The water discharge slows and stops at slow rpm, normal? It appears to have a good flow at higher rpm in a barrel. Haven't had it on the boat yet.
It has a little plastic tube that comes out of the powerhead, it has a steady stream [ solid water about 1/8 -3/16" in dia.] coming out until you throttle back to about 1/8 and lower throttle, then it stops. What I'm wondering is should there be at least drips coming out at the lowest possible setting. You have to hit the stop button to kill the motor.
