89 Johnson 70vro

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
When your engine is idling, the cooling water passes through the thermostat. When you get on plane, the extra water pressure of the engine's movement forward causes the thermostat assy to move backward/rearward in the stat housing. The plastic stat housing moves away from the round grommet and should flood the engine to tons of extra cooling water. It should not overheat when on plane if this assembly is functioning as designed. You may find the factory parts diagram helpful. Look to this website: epc.brp.com. Check to see that the internal springs are put back in the proper sequence. Something is not functioning normally. That engine is equipped with the SLOW system. When the engine thinks it's overheating, the power pack will limit rpm's to something like 2500, just enough to get you back home without significant powerhead damage.
 

seanymph4444bill

Cadet
Thread starter
Joined
Mar 11, 2014
Messages
12
With all due respect Admiral, that advice doesn't help me at all. I went to the recommended web-site and I believe I have it installed and functioning the way it should be. As far as getting on a plane I couldnt even get the boat on a plane before it shut down. And thanks, I found out the hard way under 2500 I can limp it back to the doc.
 
Top