Hey Guy's, I really need some advice. I inherited an 89 Champion Mean 15 Bass Boat. I am a little confused on the livewell operation. On the console is a switch for fill/aerate livewell. I put the plugs in both livewells and they fill up fine. However when I turn the aerator on it will keep adding water even over the overflow tubes. It does not appear to go down in the tubes. If I do not shut the pump off it will just keep filling the wells. Also under the throttle there is a cable called livewell controller. It has two settings, open and closed. How does this work. When I take the boat out of the water and pull the drain plugs from inside the livewells, all the water drains including the water in the overflow tubes. Where is the water supposed to go when it goes into the overflow tubes. Thanks for all the help.