jlayman0270
Recruit
Thread starter- Joined
- Mar 1, 2012
- Messages
- 2
88 evinrude 8 hp. I bought a 14 foot aluminum boat last summer and ran it for about 6 trips fishing before I put it away for the winter. I didn't do any of the good stuff before storage like running the motor until it's dry, etc. (ignorance). , So this summer, when I tried to start it, It started but only ran for 30 seconds, then died. I checked out the plugs and wires and found the plugs were incorrect (not the recommended manaufacturer plugs for this motor). I changed the plugs and got fresh gas and 2 cycle oil (50:1 mix) and tried again. This time no start or even so much as a sputter. My dad has the Johnson version of this engine and he said when his did that he took it to the shop where they replaced the fuel pump, so I got a fuel pump and the problem didn't go away or even improve. Later I was told to try cleaning out the carb with spray and put some cleaner in the tank to help it clean all the gunk out. I did so and it started and ran great in the tank for about 5-10 minutes. I revved it high a couple times, put it in fwd and reverse, etc. Then shut it down. About a week later at the dock no start. A quick sputtering start but then died quickly. I dont want to take it apart more than I have to and I cant afford to pay a shop $200 to fix it. Troubleshooting suggestions?