86' johnson 110hp timing specs

Bee Reel

Cadet
Thread starter
Joined
Jul 28, 2013
Messages
29
Hey everyone. Happy Labor Day. Does anyone know the timing specs for my 86' Johnson 110hp model j110tlcd? I was going to attempt the Reeves timing procedure to check the timing but I'm guessing I shoul know the correct timing first. I have located the #1 cylinder already but that about all I know. Engine starts right up and runs but seems to be running a bit rough on the muffs. New plugs, wires, rebuilt carbs and fresh gas. Thanks in advance.
 

Bee Reel

Cadet
Thread starter
Joined
Jul 28, 2013
Messages
29
No sticker. 100 compression on all 4 cylinders . I'm still a bit confused on how to go about adjusting the timing if it needs adjustment. Need to determine if the timing is correct first. Do I just make sure the timing indicator needle is at TDC on the #1 piston?
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
First get a different compression gauge and re-check the compression. Second you don't care how it runs on muffs put it in the water and see how it runs.
 
Top