86 e40elcde timing

lukepop789

Recruit
Thread starter
Joined
May 9, 2017
Messages
4
Hello, I am new here, bought my first boat. It has a Evinrude e40elcde motor on it. Has VRO. I just have a couple questions that I cant seem to find. It has been sitting awhile before I bought it and when now doesn't have spark(cant guarantee it had spark before) I pulled apart all of the plug and cleaned corrosion and put on electric grease. seems like I have spark now but instead of starting it more or less stops the starter(seems like the timing is too far advanced) what is the procedure for timing this thing? or could it be anything else? This motor has 130lbs on both cylinders. and also has a small gas leak when I prime the bulb that looks to be coming from what I believe to be the VRO pump. any suggestions or tips about this motor to help me get it running is much appreciated.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Leave the timing alone no reason to touch it. It sounds like you have a bad electrical connection or starter. Clean all the electrical connections battery cables and all grounds until they are shiny. You may also need to take the starter apart and clean it. You won't have good spark unless the motor is turning over fast enough. And you need to address the gas leak
 

lukepop789

Recruit
Thread starter
Joined
May 9, 2017
Messages
4
Thanks for the suggestions. it must have been something stuck or something because I was cranking it one time and all of a sudden it just decided to fire up. nice! where all should water be coming out of the motor? I have a stream coming out of the hole under the motor. but a ton is also coming out of the bottom end. is this normal? thanks
 

lukepop789

Recruit
Thread starter
Joined
May 9, 2017
Messages
4
assuming everything is running good and when i get it out on the water there's no problems, what would be an approximate value of this motor? I live here in michigan and all things boat related seem to fetch a pretty penny but i've got people telling me $500 and other saying $1500.
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
Depends on where in michigan. In great shape in leelanau/TC area you could get 2500 with the controls.

A good used lower goes for 700 to 800. Lower rebuilt with warrantee about 1500.
 

lukepop789

Recruit
Thread starter
Joined
May 9, 2017
Messages
4
I live in the thumb. tuscola county. not too far from the bay. im not really planning on selling it I just wanted to get an idea. I bought the 16ft aluminum boat with the motor for around 700. I think I did okay
 
Top