85 Johnson Won't Stay Running

Jmcjunkin3

Seaman Apprentice
Thread starter
Joined
Jul 15, 2017
Messages
49
So...everything went well yesterday! Took the flywheel off, cleaned everything, got it all moving nicely with white lithium grease...put everything back together, runs perfectly! I'm ecstatic. Only issue now...the lower unit is leaking oil pretty badly. I filled it with good oil a couple weeks ago and it seems like all that's coming out is the old oil. Is this just overflow? Or do I need to replace a bunch of seals in the lower unit...thanks again for all of the help!

https://drive.google.com/open?id=0B62Fyxg1VzwYTDZiclN3Nkg4R3M

Pic of the lower unit....
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
pretty good chance it's not gear oil -- just old carbon buildup in the leg. Gear oil smells like sulphur.

If it's gear oil, could be a prop seal leak. Better to have it pressure and vacuum tested, then determine what needs to be done. But first scoop some of the stuff up and smell it. If it smells like gas, wipe it off and store it with some newspapers underneath. (Newspapers are the large paper things we used to buy at news stands. Don't put your iPhone under there.)
 

interalian

Commander
Joined
Jul 23, 2009
Messages
2,105
Congrats and good work. Agree the oil is probably exhaust buildup - you've been running it a lot in the barrel.
 

Jmcjunkin3

Seaman Apprentice
Thread starter
Joined
Jul 15, 2017
Messages
49
Alright guys, better day today than my last run, but also not good. I started the boat up, let it fast idle for a bit, then took it off the trailer. Tied it up, parked the truck, and got back in....it took off, but only if I kind of hit it suddenly. I thought maybe It'd clear. Well...I got out of the no wake zone and went WOT. It sounds super smooth, no missfires whatsoever, but it just wont go upstairs AT ALL. It wouldn't even get up on plane. This boat used to top 45 easily....made sure the throttle plates were opening fully, check. Made sure the timing advance was all the way up, all good there. Decided to beach the boat and investigate further. Well....the battery was deader than hell. Fully charged and cranking well when I left the dock, suddenly dead...jumped it off and it ran perfectly fine, just wouldn't go upstairs again. Got it back to the dock, hooked my mulimeter to it, and got a lame 12.21 volts...mind you, this motor was putting out decent voltage just the other day...over the course of a minute or so, it rose just a tad to 12.24 or so, but never the 14+ I should be seeing...could a charging issue be causing a lack of RPM? It seems reasonable to think that if the coils/powerpack arent getting enough power, they won't perform as they should...any suggestions would be great! Here is a video I took of the situation.

https://drive.google.com/open?id=0B62Fyxg1VzwYaklfc3dOUWZ3bTg
 
Top