85 hp evinrude will not shut off

boatingkidd

Recruit
Thread starter
Joined
Nov 18, 2016
Messages
2
was gonna take the boat out a couple weeks ago and found the battery dead. charged the battery and the motor started and ran fine. I went to shut the motor off and it would not cut off. Talking to a couple people they figured the ignition switch was staying engaged and was not going to the off position. I replaced the the switch and I am still having the same issue. motor starts and runs fine but will not shut off, any thoughts?
 

boatingkidd

Recruit
Thread starter
Joined
Nov 18, 2016
Messages
2
don't mean to sound dumb but not sure where to find the model number on motor I see several numbers on various parts but nothing clear cut as a model number of motor. the boat is a 1977 and I am pretty sure that it is the original motor.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
The model # is on the transom bracket. Or on a core plug on the power head about the size of a quarter.
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
I've had two dual power pack V6 engine fail to shut down after turning the key to off. In both cases, one power pack kept firing, the other did not. So 3 plugs kept firing which is enough to keep the engine running. Swapped out both packs with others in my collection and the problem went away. Must have been some internal short inside the pack which kept it firing. The packs hit the garbage.
 

Joe Reeves

Supreme Mariner
Joined
Feb 24, 2002
Messages
13,262
Ignition Kill Circuit)
(J. Reeves)

A Black wire (ground) should lead from the powerhead to the powerpack. There will also be a Black/Yellow wire leading from the powerpack to a raised "M" terminal of the ignition switch. To complete the circuit, there will be a Black wire from the other "M" terminal of the ignition switch to ground.

When the key is in the OFF position = The two "M" terminals are connected,. effectively shorting/killing the ignition.

When the key in ON position = The two "M" terminals are not connected and the ignition is engaged.

Powerpack Test: Find the Black/Yellow wire that is attached to the powerpack... ground that wire to the powerhead. If this shuts the engine down, the powerpack internal circuit is okay.
 
Top