76 70hp johnson

Sthawk01

Recruit
Thread starter
Joined
Jun 11, 2017
Messages
3
Was on the water made two passes on lake motor dies no spark to any clynders checked power pack no spark no sure on how to test stator seen a few puestions and remarks on here but no answers on how to test the stator while still on motor please help last Resort is to take it to a shopdont want to if i can help it willing to learn to do it myself
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Sudden loss of spark - first thing I'd check would be the key switch. Unplug the wiring harness at the motor. Jump to the starter motor while checking for spark. Or rope it over. Motor does not need to be plugged into the harness to have spark.
 

JDusza

Lieutenant Junior Grade
Joined
Apr 21, 2009
Messages
1,015
My trusted source for ignition problems is CDI's trouble shooting guide. It is available on line at cdiignition.com.
If you really want to do a point to point coming off the stator, I would invest in a DVM with peak hold and a DVA (fancy name for voltage divider) so you can go point to point without blowing your meter. If specific measurement values are illusive, you can still tell if the component is at least changing state.After your first job you'll be an ignition expert. I find the tools very helpful and they'll pay for themselves the first time you avoid dealer service.
Remember, the stator puts out AC which is then rectified to DC
J
 
Top