Cricket Too
Lieutenant Commander
Thread starter- Joined
- May 14, 2003
- Messages
- 1,732
I'm working with a '75 Johnson 70hp. The motor starts right up and idles very smoothly. The problem is that it is a little sluggish out of the hole, once it gets on plane it goes great, it just takes too long to get there. While checking it out today I noticed that there was a sticker in front of the flywheel that said the timing should be 17 degrees BTDC and also noticed that there was a mark on the flywheel at 17 degrees, upon checking the timing I found it at 4 degrees BTDC and thought this was strange. My question is first, is 17 the correct timing for this year and second, would it start and idle this well with the timing at 4 degrees. I know I should use the manual but my friend doesn't have one for this engine, it's his boat in case I didn't mention that. If anyone can tell me the correct timing I would appreciate it. Also if anyone could give me an idea of how to adjust the timing on this motor, I'm not familiar with it, that would be great, gonna try to get my hands on a manual for it this week. Thanks.