70 evinrude

[pt3102]

I'm new to this but when this motor is hooked up to a water hose and running, there is water spewing out between the lower unit and upper unit seam area. Where the 4 bolts hold the lower unit on the upper part of the motor are located. Did I say that right. Need a little help. Thanks

 

[tashasdaddy]

Re: 70 evinrude

normal, on a motor that has had the water pump serviced.. the factory puts a little sealer around the joint.

 

[Sandhammaren05]

Re: 70 evinrude

How strong is the pee stream? Loosen and retorque gearcase bolts. Should not be water coming out there.

I'm new to this but when this motor is hooked up to a water hose and running, there is water spewing out between the lower unit and upper unit seam area. Where the 4 bolts hold the lower unit on the upper part of the motor are located. Did I say that right. Need a little help. Thanks