7.5 ted williams

[landscaper]

have 7.5 ted williams bought gas tank @walmart and fuel line where can i find fitting that goes to tank and can i change fitting on motor

 

[mrcrabs]

Re: 7.5 ted williams

I used a brass hose barb that screws into the plastic female end on the tank (wraped with teflon tape), the female fitting that goes to the engine is a chrysler type and can be found in just about any boat shop, they even have them here at Iboats.
I just want to point out one thing I have learned about the Ted Williams, the smaller the fuel line diameter the better the fuel pump element will work, I think 1/4" was stock, I did however use 5/16 fuel line and it works fine as long as the tank is not to low.

Hose barb, any hardware store should have this...
http://fittingsandadapters.com/malpiptap.html

Chrysler fittings
http://www.iboats.com/Fuel-Connecto...0136521--**********.634558650--view_id.441122