6hp Evinrude: can bad internal eng parts affect fuel pump?

larry190

Recruit
Thread starter
Joined
Jun 24, 2003
Messages
3
Still fighting the deal where the primer bulb has to be continually squeezed to keep '78 6hp Evinrude running. <br /><br />Rebuilt fuel pump twice. Tried two other known good fuel tanks. Replaced all hoses and clamps.<br /><br />Compression is 75-80 psi both cyls.<br /><br />Bad crank seals? Seems like the compression is low, but it is even and doesn't seem like it's low enough to affect performance to this degree.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: 6hp Evinrude: can bad internal eng parts affect fuel pump?

Hi Larry,<br /> Here's a test for you - remove the fuel hose from the carburetor nipple and run it over the side of the cowling into a clean coffee can. Start the motor and note whether or not fuel is being pumped - this will answer whether or not your issue is with the pump...<br />- Scott
 
Top