64 evinrude 18 hp fast win

Csg1987

Recruit
Thread starter
Joined
Apr 18, 2017
Messages
2
I have a 64 evinrude 18 hp fast win I sheared a pin about 2 weeks ago so I changed it. Now it runs good at idle but when you open it up in the lake it feels like the lower unit I removed lower unit and everything looks good It feels like the prop is slipping away from the shear pin and then catching again. I'm lost any help would be greatly appreciated it runs good but I have a problem any suggestions?
 

tomhath

Master Chief Petty Officer
Joined
Dec 5, 2007
Messages
814
Is the prop nut tightened enough? The other possibility is the clutch dog might be worn and slipping.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Are you saying it has a periodic clunk? Most people describe it as feeling like you hit a log. Or here in Florida, like you hit a gator. Whatever, it is a worn out clutch dog and probably forward gear also. Lower unit has to come apart for inspection/repair. BTW, that banging is transmitted to the drive ("shear") pin, which eventually breaks.
 

Csg1987

Recruit
Thread starter
Joined
Apr 18, 2017
Messages
2
I pulled the lower unit and everything looks really good very little wear clutch dogs look great gears working. I'm starting to think maybe it could be the bushing in the prop
 

lindy46

Captain
Joined
Nov 27, 2008
Messages
3,886
If it revs up but goes slow to nowhere, it could be a spun prop hub.
 
Top