57 18hp Johnson

Johnson 57

Recruit
Thread starter
Joined
May 2, 2017
Messages
4
I removed the reed plate from my 57 johnson 18 hp motor i bought last fall, it looks like rods have roller bearings. Thought this year engine had bushing type bearings. Can i use a higher fuel mixture ratio and if so what ratio?
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
No, they have roller bearings as you discovered. You are supposed to use 24:1. Can you use 50:1? Depends on who you ask. The issue will never be settled.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
These motors were built with better parts and engineering ( simple stuff ) than most folks are aware of.----It has been proven to me that most folks have a poor understanding of how oil " works " inside a 2 stroke engine.-----------So I agree that the ratio issue will never be resolved as there are too many wild opinions.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
I run 24:1 on mine, and has run well (reasonably clean-running, IMO). I may have a higher tolerance for exhaust smoke, as I like to run the old ones.
 

Johnson 57

Recruit
Thread starter
Joined
May 2, 2017
Messages
4
Thanks for the replies. I will stay with a 24:1 mix and be happy with my mosquito machine.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
OMC's progression to 50:1 mix was a sequential effort. Roller bearings, better manufacturing tolerances, use of thermostats, better oil quality, etc. all played a factor. Roller bearings alone don't mean you can use 50:1...
 

82rude

Rear Admiral
Joined
May 8, 2012
Messages
4,082
If you dont mind the extra cost use full synthetic.I used green earth tech full synth and it barley smoked atall on my 57.Bonus was the delightfull smell of frech fries cooking in oil,lol.
 
Top