55 Evinrude 15014 15hp water woes

oletimer60

Cadet
Thread starter
Joined
Jun 5, 2016
Messages
7
last week, i started up my 15 up for the first time this year, i noticed water pooling up in the tray below the power head. I pulled the hood off and noticed what looks like a water leak at the bottom of the head or out the tube on the bottom, Blown welch/freeze plug, or blown head gasket? Anyone have a link available for parts for my motor
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
No Title

#46, part number 202310, there is one on the bottom of the head also. BTW, you don't have to remove the head or powerhead to access it. Just remove the lower rear pan.
 

Attachments

  • photo245432.jpg
    photo245432.jpg
    285.6 KB · Views: 1

oletimer60

Cadet
Thread starter
Joined
Jun 5, 2016
Messages
7
Thanks Supreme Mariner, thats the ticket. Bottom freeze plug let loose.. 15 minutes, Alil permatex and a new plug did the trick. Unfortunately, now when i prime the carb, I leak out gas from the glass bowl area. Bad gasket i'm assuming. Do you have a link (pic) to my carb as well? Hope I'm not asking to much here,
Can you send me all the links you have to my motor, as i plan on putting in a new water pump just as a precaution. Its a 1955 15hp 15014 Fastwin Aquasonic
 
Top