5.7gs coolant temp sensor

Galvez83

Petty Officer 1st Class
Joined
Oct 31, 2019
Messages
242
New to me 5.7GS PEFS engine. I am looking to replace the coolant temp sensor on the side of the thermostat housing. When i do a parts search from Volvo Penta it gives me 3850397 but that is not the one that i currently have. My sensor is with the flat connector for only one wire and the part from Volvo has a connection for a pigtail. Am i missing something?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
40,757
The one your finding is the ECM sensor, the one with one connection is the gauge sender. The gauge sender has no effect on the motor, it's just there as a visual aid for the driver

Look for a standard 240-33 ohm sender
 

Galvez83

Petty Officer 1st Class
Joined
Oct 31, 2019
Messages
242
I gotta say, it makes no sense VP putting a part number that an engine does not have. Then again that VP for you.
 

Fun Times

Moderator
Staff member
Joined
May 16, 2009
Messages
8,809
I gotta say, it makes no sense VP putting a part number that an engine does not have. Then again that VP for you.
Sounds like possibly the 2 temp sensors are swapped backwards if you have a 1 wire at the thermostat housing as it's normally found on the starboard sideish intake manifold area as seen with VP part number 3852029 item number 20, https://www.volvopentastore.com/Intake-Manifold/dm/store_id.366--view_id.779268

1709778950951.png


You mention a flat spade? connector, if you image search the 3852029 some try to come up along with the design I imaged above.
 

Galvez83

Petty Officer 1st Class
Joined
Oct 31, 2019
Messages
242
The one for the manifold is correct already installed. What i dont understand is why 1 wire only from factory and on the diagrams shows pigtail. That makes buying parts a whole lot of fun. Even if i where to buy with pigtail that would leave 1 wire left without a clue to where it would connect to. Would anyone have a wiring diagram for 5.7gs?
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
47,562
Per the parts breakdown on volvopentastore.com for the 5.7GSPEFS

1709830216877.png

3850397 is on the thermostat housing
872068 or 3852029 is in the manifold
1709829859814.png

1709830265289.png

1709830314353.png



1709829988954.png

1709830013843.png

1709830058358.png

1709830082213.png
 

Galvez83

Petty Officer 1st Class
Joined
Oct 31, 2019
Messages
242
Per the parts breakdown on volvopentastore.com for the 5.7GSPEFS

View attachment 395202

3850397 is on the thermostat housing
872068 or 3852029 is in the manifold
View attachment 395195

View attachment 395203

View attachment 395204



View attachment 395196

View attachment 395197

View attachment 395198

View attachment 395199
Correct, and yet somehow i have in the thermostat housing a spade switch and connector. I found the wiring diagram for 5.7GS and indeed does show only 1 wire connection. #15 on the pic1000016522.jpg
 
Top