5.5 Johnson motor issue (s)

littlejohnson

Cadet
Thread starter
Joined
Sep 8, 2013
Messages
11
Hi there this is my first post to the forum under any topic. I hope we can come to some sort of conclusion. I recently picked up a 1963 5.5hp Johnson outboard motor. It was included with a trade I had made. The motor will start with some ease but has trouble running. It starts and and then idles rough and the slightest change in throttle pretty much kills it. Doesnt seem to matter the gear either. Could a bad mix of fuel cause this? Aside from fuel are there any, more educated opinions on the cause? The engine looks amazing for the year and the fact I have no money in the thing motivates me to get it running tip top. I must add this is my first boat motor of any kind aside from a trolling motor. I have some basic knowledge of operation but nothing further. Any feedback would be greatly appreciated. Thanks and hope for some quick responses.
 

Daviet

Fleet Admiral
Joined
Sep 24, 2008
Messages
8,958
Re: 5.5 Johnson motor issue (s)

Welcome to the forum.
You have a good engine to start out with.
I would start by doing a compression and spark test to get a base line on your new engine. The way you describe the problem I bet you are going to have to overhaul the carb, not a bad job to do. There are lots of posts on how to do it, do a search and do some reading.
 

schematic

Lieutenant Junior Grade
Joined
Jan 12, 2008
Messages
1,102
Re: 5.5 Johnson motor issue (s)

First thing to do is to remove flywheel and check coils for cracks.(very common)
Secondly, it never hurts to clean the carb when they get that old......
 

schematic

Lieutenant Junior Grade
Joined
Jan 12, 2008
Messages
1,102
Re: 5.5 Johnson motor issue (s)

sorry daviet, posted at same time.......
 

handifly

Seaman
Joined
Jul 21, 2013
Messages
56
Re: 5.5 Johnson motor issue (s)

Carb kit fr iBoats is part # 18-7043
$14.99

I bought a couple of them.
If your float is bad you can get them from vintageoutboard.com
 
Top