40 hp GALE flywheel exploded

trebot

Petty Officer 2nd Class
Thread starter
Joined
Jul 7, 2004
Messages
102
We were running 3/4 to full throttle when we heard a "bang" from the motor. Slowed down, running fine, accelerated and ran fine back to the dock. Got home and removed shroud. Pieces of what looked like a gear lying in engine compartment. It is the ring [ which has gear shaped teeth around the circumference ] which sits on top of the flywheel. It appears to be a press fit to the flywheel.
Can't figure what its for as engine runs fine.
Any thoughts?
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
Starter ring for the electric start may want to have the flywheel re balanced.
 

trebot

Petty Officer 2nd Class
Thread starter
Joined
Jul 7, 2004
Messages
102
If you mean the ring gear that elect start engages, that's not it. Elect start works fine. Its the gear looking ring on top of flywheel.
 

trebot

Petty Officer 2nd Class
Thread starter
Joined
Jul 7, 2004
Messages
102
Elect start works fine. It's the ring with teeth on circumference that sits on TOP of the flywheel.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
not sure what year, but think that's probably the ratchet on top of the flywheel (part of the recoil starter operation). If that's it, must be the three bolts up there that are used to pull the flywheel (i.e., the bolt holes). NOW, if you did anything up there, maybe the bolts weren't tightened down. The ratchet spins with the flywheel.

sound right? Post a yr./model number or pic (actually, would like to see a pic).
 
Last edited:

fhhuber

Lieutenant
Joined
Jun 19, 2014
Messages
1,365
That one of the engines that COULD have a pull start, but sometimes didn't come with it or a lot of people removed them because they tended to break?
I had an Evenrude 35 that had the pull start removed because one of its parts broke and the pull start hadn't been used in over 20 years.

I still have the rope and recoil parts...

Maybe its a remnant of a pull-start that you don't ever use...

http://forums.iboats.com/filedata/fetch?id=7054297&d=1400796462

Look similar? (except the recoil unit gone and the upper "gear' is what broke?)
 
Last edited:

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
???------Maybe it is the ring gear for the optional belt driven generator.
 

trebot

Petty Officer 2nd Class
Thread starter
Joined
Jul 7, 2004
Messages
102
The picture you posted shows the part that "exploded". See the ring gear which used for elect start? Its the smaller ring gear above that broke apart.
 

trebot

Petty Officer 2nd Class
Thread starter
Joined
Jul 7, 2004
Messages
102
The belt driven generator gear sounds good. The teeth look more for a cog belt than another gear.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
That would be for driving the optional belt driven generator !
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Wow. I've busted some belts, but never the pulley. I think there must have been some prior damage to the flywheel, maybe stress fractures or bending from flywheel pulling -- think a donor flywheel would be in order, maybe a donor motor for future use (always a good idea, IMO).

If using a generator, don't think it would have been the cause of the flywheel issue, and can find a replacement flywheel with the pulley.

I agree with Chinewalker, though -- can do fine without the generator.
 

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
You are not the first one that has happened to, and wont be the last. As stated, if you don't have a generator installed, keep running her. Is it all off, or just part of it? Don't want your flywheel unbalanced.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Think I would get a replacement. At a minimum, take a very careful look at the wheel. When things fly apart for no apparent reason, it's good to be a little cautious (JMO).
 
Top