4" Heat Exchanger U- Bolts

[yamhoss86]

Does any one know where i can purchase the U bolts for the 4" heat exchanger?
Any other alternatives to the U bolts?
Thanks

 

[Bt Doctur]

Re: 4" Heat Exchanger U- Bolts

a good hardware store, electrical supply store, trailer supply

 

[a1nowell]

Re: 4" Heat Exchanger U- Bolts

You might try Breezeworks

 

[HT32BSX115]

Re: 4" Heat Exchanger U- Bolts

Does any one know where i can purchase the U bolts for the 4" heat exchanger?
Any other alternatives to the U bolts?
Thanks

Howdy,


Mine is held on with stainless steel hose clamps.

If you reveal what you're working on, and maybe include a picture or 2, we could be of a little more help.......


Regards,


Rick

 

[stonyloam]

Re: 4" Heat Exchanger U- Bolts

Assuming a 470: part # 10-98619A1

 

[Live-liner]

Re: 4" Heat Exchanger U- Bolts

Hi,
I just did a R&R on mine and ended up re working the threads so I could re-use them. I thought about using ss hose clamps but managed to salvage the u-bolts. I am very confident that the hose clamps would work fine. I would also suggest putting a rubber pad between the mount and the exchanger. I use a 4" furnco cut in half.
Good luck!

 

[alldodge]

Re: 4" Heat Exchanger U- Bolts

I have several pieces of heavy equipment and 4-inch exhaust is the norm. Check with NAPA or other heavy equipment manufactures, peterbuilt, cat, kenworth, etc