35hp Johnson Seahorse

SolomonsIslandMD

Recruit
Thread starter
Joined
Aug 16, 2003
Messages
2
I just bought a 35hp Johnson outboard, tiller control. The guy who bought it got it from the state, said that they had it on a big zodiac on one of their state run boats but they never really used it. He said he himself only put fewer than 10 hours on it and I believe him by looking at the motor although I know it should be an early 80's outboard. <br />Anyhow, I got it home, looked it over, put it on my skiff. The thing fired up after three pulls, I took off from the dock and it ran great for 20 min, it then just powered down and shut off. I opened the cover to find that the two sets of wrapped wires coming from the power pack were laying on the engine and that as it grew hot the wrapping on the wires melted through to the wires inside. I don't know that it really harmed the wires inside but I'm thinking it did something to the power pack.<br />Does this sound feasible and also<br />Where can I find the year of my motor?<br /><br />model #J35RCSM<br />Serial E5270831<br /><br />Thanks for any answers you may have<br />Chris
 

Lark40

Senior Chief Petty Officer
Joined
Oct 29, 2001
Messages
793
Re: 35hp Johnson Seahorse

Here is a site that has all the years and old catalogs. <br /><br />Don't let the German language stop you - the website can be understood if you think about.<br /><br /> http://mitglied.lycos.de/old_omc/
 

Hooty

Rear Admiral
Joined
Oct 2, 2001
Messages
4,496
Re: 35hp Johnson Seahorse

The engine is a 1980 model.<br />It's a water cooled engine and should never get hot enough (170*F max.) to melt the insulation on the wires. If it did get that hot, my guess is the engine is cooked. The more likely scenario is something shorted, the wires got hot and melted the insulation <br />If you don't have a manual for the engine, you can order one here from iboats. Click on "Repair Manuals" in lower lefthand corner of this page.<br /><br />g'luck & c/6<br /><br />Hooty
 
Top