30hp starting problem

Ben Brown

Recruit
Thread starter
Joined
May 24, 2016
Messages
1
I have a 1999 Johnson 30hp manual start. It used to start on the first pull every time but is now having starting issues. I go through the starting ritual like I did before. I squeeze the primer bulb until it's firm, pull the primer knob and push it back in until the orange line is just showing, then I pull the rope. It turns over but doesn't fire up. Then I pull the rope again and no start. 30 pulls later it starts and runs like a top. I thought it was a fuel blockage so I started trying to track it down. I pulled the fuel line off the top of the carb and it squirted just fine when I pulled the primer knob. So I pulled the fuel line off coming out of the bottom of the intake manifold and then I pulled the primer knob. Fuel squirted everywhere. I was under the impression that the line at the bottom of the intake manifold was to return leftover fuel back to the main fuel line. Is there are faulty check valve in the primer knob causing fuel to flow into the intake manifold, thus causing flooding? Any ideas, thoughts?
 
Top