Time for some help from the pros. So, I have a 1977 Sea Ray SRV 190 that I'm restoring. I picked up an E6SE motor, which would be a roller block from an 86 Thunderbird 5.0. I'm rebuilding the block. Its gonna be a .040 bore, and I'm gonna put some 351w heads on it. I was considering stroking it with a 351w crank, but I don't want to exceed 300HP and have to change the drive. So, I think that would be a waste for me. My question for the boat experts is what cam would you suggest for me here. My ultimate goal is high torque with around 275 HP. I want a good strong cam thats gonna be able to hold up to the torque RPM requirements of boating. Thanks a lot
