30 Evinrude will turn over but will not crank

wannafishbutcant

Cadet
Thread starter
Joined
Jun 13, 2016
Messages
7
Was out on the lake running around adjust on the carb, got my hand on the kill switch and it shocked the mess out of me the motor shut down and now all it will do is turn over. Any ideas on what might be the problem would be appreciated. Thanks in advance
 

ondarvr

Supreme Mariner
Joined
Apr 6, 2005
Messages
11,527
So that there's no confusion, turning over and cranking are the same thing, starting is the next step.

Check the fuses, should be one on the motor itself. Also disconnect the kill switch, it may be shorted out.
 

wannafishbutcant

Cadet
Thread starter
Joined
Jun 13, 2016
Messages
7
only fuse i could locate was a glass fuse that was on a wire. couldnt locate and thing ON the motor itself.
 

GA_Boater

Honorary Moderator Emeritus
Joined
May 24, 2011
Messages
49,038
It would help to identify which Evinrude 30 you are working on.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Go to cdielectronics.com for trouble shooting procedures on your motor.
 
Top