3.6gt lower units

scotth944

Recruit
Thread starter
Joined
Jun 18, 2003
Messages
1
I have twin '87 johnson 3.6gts on my 25 cat. The lower units are supposedly made by "Second Effort". I am concerned that I won't be able to find a replacement if I have a failure. I have 1 spare that has been nose coned but I don't know if I should use it if I have a problem. Who has a low water pickup (oem) gear case? :(
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: 3.6gt lower units

Last Chance.....I mean Second Effort made a couple of different ones. Right now they are impossible to find.<br /><br />If you have the standard lowers, not the twin pinion lowers, the standard rotation one can be replaced by any V8 gearcase. The reverse rotation may be a bit harder to find pieces for if its the original SE style. On those they actually ran the powerhead backwards (dont ask why). Does yours have a green cable just under the flywheel on the counter rotation motor?<br /><br />Even if it does you can convert it back to standard rotation and use a newer style V8 gearcase. <br /><br />If you have to have low water pick ups I would use a 275 V8 case and put a Bob's nosecone on it rather than a 300 (3.6) case. If you dont need low water pick up on the motor I would use the 3.6 case with out a nosecone. <br /><br />Good luck!
 
Top