2hp evenruide decarbing

[pdjp1584]

I have did the decarbing procedure with the seafoam.now my outboard is running rougher then before. I pulled the sparkplug and it looks okay. I drained the seafoam mix and put in fresh gas with oil still running a little rough and smoking. Any ideas or tips

 

[Haffiman]

Re: 2hp evenruide decarbing

After any decarb, your idle mix will probably need to be adjusted, and even your carb might need some cleaning/rebuild depending on how much deposits have been dissolved blocking jets.

 

[pdjp1584]

Re: 2hp evenruide decarbing

That makes sense it seemed like it was running on the rich side

 

[kfa4303]

Re: 2hp evenruide decarbing

This link may help pdjp. After you have the carb dialed in while in the test tank, take it out and run it at WOT for 20-30 with your normal fuel/oil mix in order to burn off all of the deposits loosened during the decarb process. This link should help with the carb.

http://forums.iboats.com/showthread.php?t=167352