2h Johnson Identification No Plate

WayneDB

Recruit
Thread starter
Joined
Jun 3, 2016
Messages
2
I recently obtained a 2HP Johnson with no identification Plate on it. It has separate Fuel Tank and Motor Cover. I believe from checking as much as I have that it is an early 1970's Model. I have checked by parts numbers on early 70's models on different Parts Sites and the only matching one I have found is for the Magneto Flywheel My serial number GT-580892-62, Parts I have found have a number 0580892 FLYWHEEL. My Cylinder Assembly Number is 383371. My serial on the housing that holds the Spark Plug is 313513. My Carburetor Float chamber serial Number is 313723 with a G on top of that and a 2 under it. My Cover Mounting Bracket serial number is 316472. There is no plate on the Clamp but the latch for mine has the serial number 31395. There is a Circular Metal Piece on the motor with the number C0048635 on it with the Letter M over it. This sure makes it hard to tell what Year it is but hopefully someone here will know. Thanks for any help. Wayne
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
The C0048635 is the serial number. The rest are just casting numbers so they most likely where in use for several years. If the paint and decals are intact than a picture could help to identify it.
 

WayneDB

Recruit
Thread starter
Joined
Jun 3, 2016
Messages
2
The Motor was repainted unfortunately. What Model and Year is that serial number for ?
 

hardwater fisherman

Lieutenant Commander
Joined
Mar 19, 2010
Messages
1,725
I cant tell you the year by the serial number. Some people have luck by calling BRP customer service. I do not know the phone number though.
 

Canoe2

Petty Officer 2nd Class
Joined
Jul 22, 2012
Messages
136
If you are describing what i think you are, and the tank is a separate entity from the recoil/motor cover, I have the same set up on my 2402E model 2 hp evinrude mate.
 

Bonaventure

Petty Officer 2nd Class
Joined
Jul 3, 2016
Messages
167
The separate metal fuel tank is 1970 to 1974 or possibly 75. After that they went with a plastic tank set beneath a longer top incorporating both the tank and the recoil mechanism. The model numbers are 2R the year followed by another letter.



If you go to Crowley Marine and look for the model starting with 2R71 it should come up. Then see if the part numbers are the same between years.

Hope this is of use.
 
Top