25hp Evinrude interchange

Dad of 3

Recruit
Thread starter
Joined
Jul 16, 2017
Messages
2
Hi I'm new to the site and was just wondering if there was some wisdom out there that could help me with a purchase decision. I have 1972 25hp Evinrude model 25252 with stripped spark plug holes. I have an opportunity to purchase a 1976 25hp Evinrude 25602e with bad crank bearings. Does the head interchange or would this be a good engine to pick up for backup parts?
 

lindy46

Captain
Joined
Nov 27, 2008
Messages
3,886
The part numbers are different. You need part #383535. Go to AOMCI.org and place a free want-ad. Someone there will most likely have one.
 

flyingscott

Fleet Admiral
Joined
Apr 8, 2014
Messages
8,348
I believe the head will interchange. I think the difference would be the 76 head has the coil mounting bosses on it which yours won't. The head gasket is the same for 69-76 motors. You could have your head repaired either heli-coils or inserts which are preferable. Somebody will be along shortly if I am wrong.
 

Dad of 3

Recruit
Thread starter
Joined
Jul 16, 2017
Messages
2
O.K. Thanks for the response. How close is the lower unit to switch? I'm just trying to guesstimate if it's worth purchasing based on interchangeability. Thank you in advance.
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
If its a 76 with bad bearings free would be the only acceptable price. You are doing them a favor by getting junk out of the yard.
 

F_R

Honorary Supreme Mariner
Joined
Jul 7, 2006
Messages
28,226
Lower units are the same, unless there is a "gotcha" there somewhere that escapes me at the moment.
 
Top