Re: 25 hp Johnson seized up
Remove spark plugs, and spray lots of PB Blaster (or similar penetrating oil) into cylinders. Let this sit, repeating applications of oil for a couple days. Place a socket on the flywheel nut and try to rotate the flywheel clockwise. Don't apply too much pressure, just enough to see if it will move. Have patience. If it breaks free, and you have good compression readings afterwards, run the oil mix a bit heavy for the first tank of fuel. And make sure you find the cause of the original seizure (improper storage? Overheat? No oil?) So it won't happen again. If it was stored without fogging oil, it may be salvageable. Overheats/no lube can be a lot harder on an engine. Good luck!