Launched it at the ramp today, started up first try after sitting for 2 years, but no water. Let it run a few minutes and nothing. Went home, dropped the lower unit, checked the water pump- looks good. Hooked up hose to flush attachment, water not coming out of outlet port on back of engine. It does come out of the inlet tube from the pump to the engine though. At first thought it seemed like that tube just wasn't seated in the pump, because when hooked up to the hose, the water was filling up the lower unit. Tried unclogging it with a piece of wire from the outlet port in case there was some blockage, still nothing.
Where does the top of that tube end up? Do I have to crack the head in order to get to it? Any thoughts or suggestions would be greatly appreciated.
Thanks!
Alex
Where does the top of that tube end up? Do I have to crack the head in order to get to it? Any thoughts or suggestions would be greatly appreciated.
Thanks!
Alex