2006 9.9 4 stroke Carburetor replacement

[lilhuff]

I have a new to me 2006 mercury F 9.9 EL serial number 0R068414. The carb was full of gelled gas and when I took it off to clean it someone had been in there before with an impact or very strong mitts. Several screw heads were damaged and or the wrong type. The main jet screw head was completely snapped off. I was able to clean it up and the motor runs ok but it leaks badly. I would like to replace it but it seems the carb is discontinued and I can't find a Mercury one. Does anyone know a good reliable replacement?

 

[racerone]

If you do get it running then store motor with carburetor EMPTY.------An empty carburetor does not gum up.

 

[Sea Rider]

Post pics of said motor and carb, if your motor happens to be a 4 stroke 9.9 HP rebadged Tohatsu model an OEM carb will surely cost much less than what Merc usually asks for...

Happy Boating​

 

[lilhuff]

Here is a picture of the carb in the engine.

 

[Sea Rider]

Don't know if this 4 stroke 9.9 Tohatsu 96 year model will match,

Tohatsu Outboard 9.9HP OEM Parts Diagram for CARBURETOR | Boats.net

Buy OEM Parts for Tohatsu Outboard 9.9HP CARBURETOR Diagram

www.boats.net

if Paul is following this thread he should know about that matter....

Happy Boating

 

[Faztbullet]

That one wont come close to fitting but this one will....

https://www.amazon.com/3323-835382T04-3323-835382A1-835382T1-835382T3-Carburetor/dp/B07L5JDYKY

 

[lilhuff]

That one wont come close to fitting but this one will....

https://www.amazon.com/3323-835382T04-3323-835382A1-835382T1-835382T3-Carburetor/dp/B07L5JDYKY

Thank you Fatzbullet I was able to make this carb work. The old carb has a top overflow so I swapped that over and the choke was reversed and I was able to swap that also. Needed a little modification to the choke assembly but works great. Thanks again