2006 50hp honda serial: BAZS 3600812

[MrFishy]

Bought this engine compression came out even. Having high hopes for the motor. Mounted it and going to do a service tomorrow. Can some one please help with this part image attached and circled. It won’t stay in the fitting and slips out.

 

[racerone]

Cable terminal.------About $10 at your Honda dealer.

 

[MrFishy]

Cable terminal.------About $10 at your Honda dealer.

Any chance you have a part number for me

 

[ahicks]

I'm not real sure I'm looking at the right part. I'm thinking we're talking about #2 in this diagram?

https://www.boats.net/catalog/honda/outboard/50hp/bf50a2-lrta-vin-bazs-3220001-to-bazs-3299999/throttle-rod

If that is the case, you can order it pretty easily. Before that though, see if the rod isn't screwed into an identical fitting at the other end - way too far? Unscrewing it a few turns may allow you to recenter that rod between the fittings.

 

[MrFishy]

I'm not real sure I'm looking at the right part. I'm thinking we're talking about #2 in this diagram?

https://www.boats.net/catalog/honda/outboard/50hp/bf50a2-lrta-vin-bazs-3220001-to-bazs-3299999/throttle-rod

If that is the case, you can order it pretty easily. Before that though, see if the rod isn't screwed into an identical fitting at the other end - way too far? Unscrewing it a few turns may allow you to recenter that rod between the fittings.

Thank you that’s exactly what I was looking for

 

[MrFishy]

Can some one please send me a part number for the thermostat?

 

[ahicks]

I can cure your hunger with a fish, or teach you how to fish. Which will it be?

 

[MrFishy]

I can cure your hunger with a fish, or teach you how to fish. Which will it be?

Jesus is that u

 

[ahicks]

;^)

https://www.boats.net/catalog/honda/outboard

From here, pick your HP, then your year, and for most parts I use the LRTA models. From 2004 on back the 50's are the same....

Holler if that doesn't work out for you! -Al

 

[MrFishy]

Thanks just needed some guidance

 

[MattFL]

I would consider that a safety issue and definitely replace the part with a new one. Losing throttle control can be dangerous. But do follow @ahicks advice and make sure you get enough threads on both sides to get a good attachment.