I got my remote steer 40hp started finally. The old fuel was the problem, I even think somebody had made a premix. first day trying to use it at boat ramp it wouldnt start and then had a loud backfire, then lot of oil in the water. Old fuel.
So I ran some of my cars 95octane fuel through it home with water hose and muffs on it. Started 3rd turn over, but what I didnt know before is how to choke it. One issue is the neutral idle seed level on the throttle control only works when its fully lifted, it needs some work, there is no increment. I can see with hood off it only controls the throttle lever when its fully pulled up, its stiff too. Is this hard to fix?
So she started nicely with new fuel and correct start procedure. BUT, after about ten minutes running with water streaming out nicely, it had some white smoke start to happen. this is add pure idle speed. Does this mean one of my cylinders is getting water inside it, or is there a less worrying explanation for the white smoke?
So I ran some of my cars 95octane fuel through it home with water hose and muffs on it. Started 3rd turn over, but what I didnt know before is how to choke it. One issue is the neutral idle seed level on the throttle control only works when its fully lifted, it needs some work, there is no increment. I can see with hood off it only controls the throttle lever when its fully pulled up, its stiff too. Is this hard to fix?
So she started nicely with new fuel and correct start procedure. BUT, after about ten minutes running with water streaming out nicely, it had some white smoke start to happen. this is add pure idle speed. Does this mean one of my cylinders is getting water inside it, or is there a less worrying explanation for the white smoke?