frankkanyon
Recruit
Thread starter- Joined
- Aug 26, 2013
- Messages
- 2
Hi,
I have a 2004 Johnson 115 hp (J115GLSRC) on an Xpress X17. When i first bought the boat i had the oil pump removed so i always mix the oil staight into the tank. The other day i went fishing and first thing in the morning of the tournament i took off and once i got to about 4900 rpms i heard the alarm go off. This was the first time i ever heard this. It wasnt in any steady pattern. I mean it wasnt a constant beep...it would beep for a second then stop, then 3 seconds would go by and it would beep, and sometimes the beep would last a longer duration of time than the others. The motor is peeing water out of the back fine although i havent changed the impeller since the beginning of last season. The only other thing i could tell you guys is that last week i was changing the spark plugs and noticed a connector in the front of the motor (towards the boat) that was kind of located coming out from under the carbs that was not connected to its other half. So i connected them. Could i have accidentally re connected the oil pump and the alarm is saying i have no oil? But wouldnt it be a constant beep? I am going to order the water pump repair kit just for safety measures. Any ideas what is going on?
I have a 2004 Johnson 115 hp (J115GLSRC) on an Xpress X17. When i first bought the boat i had the oil pump removed so i always mix the oil staight into the tank. The other day i went fishing and first thing in the morning of the tournament i took off and once i got to about 4900 rpms i heard the alarm go off. This was the first time i ever heard this. It wasnt in any steady pattern. I mean it wasnt a constant beep...it would beep for a second then stop, then 3 seconds would go by and it would beep, and sometimes the beep would last a longer duration of time than the others. The motor is peeing water out of the back fine although i havent changed the impeller since the beginning of last season. The only other thing i could tell you guys is that last week i was changing the spark plugs and noticed a connector in the front of the motor (towards the boat) that was kind of located coming out from under the carbs that was not connected to its other half. So i connected them. Could i have accidentally re connected the oil pump and the alarm is saying i have no oil? But wouldnt it be a constant beep? I am going to order the water pump repair kit just for safety measures. Any ideas what is going on?