valiant500hp
Recruit
- Joined
- Apr 20, 2003
- Messages
- 4
I was wondering if anyone would know who to contact about the minimum spacing of 2002 200hp Optimax motors on the back of an aluminum sled. We are having problems with the motor cavitating all the time when you try to accelerate. The motors are in the water the correct depth and they rev the correct RPM at top speed. It makes no sense to us. The boat is a 2002 24' Motion Marine. There is plenty of weight in the back of the boat with those two hogs on the back. We can't figure out why it will do this so we thought we'd post the problem and see if you intelligent people could help. We have ruled out just about everything else except that maybe the motors were mounted too close together. Any insight would be greatly appreciated. Thanks