Ok
HOPEFULLY this will be the last update for this thread/problem.
Got to play with my boat tonight on the trailer with the muffs and hose. After doing a but ton of research to make sure that I was doing all things right, I redone the timing( it was a good bit off. I used the method posted in the adults only section. I read a step, then done it, read a step and done it, the whole way through), I also had to readjust the carburetor mixture and idle settings. After all of this I AM now getting the initial 10 at idle(about 650) and an additional 14 to 16(at 2k to 2500). I will attempt to put it in the water this weekend and if that happens, I will let you all know what happens.
Either way, THANK YOU ALL for your attention and help.
HOPEFULLY this will be the last update for this thread/problem.
Got to play with my boat tonight on the trailer with the muffs and hose. After doing a but ton of research to make sure that I was doing all things right, I redone the timing( it was a good bit off. I used the method posted in the adults only section. I read a step, then done it, read a step and done it, the whole way through), I also had to readjust the carburetor mixture and idle settings. After all of this I AM now getting the initial 10 at idle(about 650) and an additional 14 to 16(at 2k to 2500). I will attempt to put it in the water this weekend and if that happens, I will let you all know what happens.
Either way, THANK YOU ALL for your attention and help.
