2 Questions

T

tap12

Recruit
Joined
Jun 18, 2015
Messages
2
I have 2 volvo penta dps a 1.95 outdrives. When I make a hard turn at a higher speed I hear a clicking sound, not when docking or when making a normal turn only hard left or right wheel turned all the way. Also, do you know where I can get instructions on adjusting shift cable, I can't find anything.
Thanks,
Tom
 
D

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,322
In a hard turn the u joints are stressed to the maximum. Probably hearing something related to that. Have you pulled the drives to inspect?

Shift cable adjustment is performed at the linkage located on the aft side of the driveshaft housing. Behind the cover. If the trunion is adjusted to be max fore/aft the adjustment can be performed at the remote
 
T

tap12

Recruit
Joined
Jun 18, 2015
Messages
2
dubs283 said:
In a hard turn the u joints are stressed to the maximum. Probably hearing something related to that. Have you pulled the drives to inspect?

Shift cable adjustment is performed at the linkage located on the aft side of the driveshaft housing. Behind the cover. If the trunion is adjusted to be max fore/aft the adjustment can be performed at the remote
Click to expand...
Do you know what the procedure is to do the adjustment?
 
D

dubs283

Vice Admiral
Joined
Jul 27, 2005
Messages
5,322
tap12 said:
Do you know what the procedure is to do the adjustment?
Click to expand...

Yes

It's quite simple. Remove the cover and look. Rotating the trunion fore or aft at the shift cable end will adjust accordingly
 
You must log in or register to reply here.
Top