1998 Johnson 90 wireing harness wont plug into control?

Gabilgerat

Cadet
Joined
Dec 7, 2015
Messages
9
I just bought a omc binnical control with the key switch built in to go with My 1998 Johnson 90SPL, they both have the square plugs but they don't match, the only one that plugs in is the trim harness, do they make an adaptor for this
 

jakedaawg

Rear Admiral
Joined
Jun 26, 2012
Messages
4,275
It's times like this that we will miss emdsapmgr.

I don't have the answer for you. I suggest contacting a dealer.

On the engine side of harness, does the spl use a red plug or deutsch connectors? May be you need a pinnacle for pre 96 as the spl motors were bargain priced with older technology. Not really the pinnacle but the Key switch assy.
 

Gabilgerat

Cadet
Joined
Dec 7, 2015
Messages
9
the control and motor both have deutsch connectors but are different,. the wire colors correspond but the plugs are both female???
 

Gabilgerat

Cadet
Joined
Dec 7, 2015
Messages
9
mystery solved, My new helper who installed the wiring harness put it in backwards {motor end at the console] , I crawled under the console this eve and discovered the mistake.
 
Top