1998 Johnson 115 Oceanrunner Rev Counter

rickh

Recruit
Thread starter
Joined
Jul 5, 2003
Messages
3
Tacho does not return to zero when engine switched off - remains "stuck" anywhere between 1200 and 1500 RPM. Turning ignition back on to first position (but not start) will return tacho instantly to anywhere between 100-500 RPM position, turning ignition off again at that point will leave tacho at that same position. It neve retuens to zero. Weird... and annoying.<br /><br />Any ideas anyone?
 

rjarreau

Petty Officer 3rd Class
Joined
Jul 5, 2003
Messages
79
Re: 1998 Johnson 115 Oceanrunner Rev Counter

this is a normal with tachs due to the signal comes from the rectifier and the power is connected directly to your ign switch. so when you kill the motor with the ign switch it kills power to the tach. and there you have it stuck reading rpm's the only way to fix this is to hook up the power from the tach to your accessory switch on the instrument panel. all boats have this similar problem and it is normal. heheh just be lucky your tach works !!!!
 
Top