1998 evinrude ocean pro 175

Peacedale17

Cadet
Thread starter
Joined
Jun 29, 2016
Messages
12
Fatz bullet I did that and everything checked out., I will look into the controlls that I switched. This is frustrating that I think it's something simple. Highly doubt I was sold a bum motor
 

Peacedale17

Cadet
Thread starter
Joined
Jun 29, 2016
Messages
12
Rechecked all wiring for the controlls all good kill switch was working still nothing. Guess it's time to bring it in
 

bob johnson

Rear Admiral
Joined
Feb 25, 2009
Messages
4,306
have you checked continuity of the black/yellow wire from the control to the plug that goes into the power pack?

id also do the same for the neutral safety switch.... I have a wire break in mid length of the harness..under my floor!!....that's sucked figuring that one out.....

good luck

lets us know either way......don't find out what it was and not come back and let us in on it...that's how we all learn !!!!!!!!!!!!!

bob
 
Top