1996 Sea Nymph pics

setterman

Cadet
Joined
Dec 12, 2009
Messages
11
This is the 1996 Sea Nymph I have been looking for help with the leak noticed after a rain with the cover partially blown off. I have tall the paperwork/manuals from the original sale. It has a bimini top with zip on panels for a full cabin enclosure. The Bow seat area is a removable section that changes configuration. The flooring appears to be solid with my 250 pounds on it. The one picture showing the keel plate? meeting bow plate(?) is where I noticed the dripping after a rain. This photo should be rotated clockwise 90 degrees. Iflooded the boat after supporting trailer and after a day was still the only place I could find a drip ( single drops). I am hoping that I can remove the bow raised platform and see down into the suspect area and use gluvit. Anyways motor was checked out befor fogging and is ok. I appreciate the suggestions I have been getting and hopefully I can rent a garage to get some winter work done!
 

Attachments

  • bow.JPG
    bow.JPG
    140.3 KB · Views: 0
  • side.JPG
    side.JPG
    124.2 KB · Views: 0
  • DSC_0016sm.JPG
    DSC_0016sm.JPG
    132.3 KB · Views: 0
  • main area.JPG
    main area.JPG
    141.1 KB · Views: 0
  • leak area.JPG
    leak area.JPG
    89.6 KB · Views: 0

Huron Angler

Admiral
Joined
Apr 7, 2009
Messages
6,025
Re: 1996 Sea Nymph pics

Nice rig, good luck getting that leak sealed up, gluvit is the best to use, and good to do every rivet and seam.

I have a 16' Starcraft SS that is very similar, Sea Nymph was started by the same guy that started Starcraft. I really like how the bow is setup on yours, I'm looking to do something like that to mine.
 

jspano

Senior Chief Petty Officer
Joined
Oct 30, 2009
Messages
790
Re: 1996 Sea Nymph pics

nice looking boat... good luck!

joe
 
Top