1996 M140A2 Installing Blue Seas ACR Looking for Starter Isolation Location

[TheDerby]

Motor 1996 M140A2

Issue is trying to locate a termination point for the starter isolation circuit on a Blue Seas ACR.

A location at the motor is preferable to one near the controls.

I would think that the green wire on the starter solenoid is the right wire to tap into. I have a Factory Service Manual, however the pictures and descriptions are a bit vague on this subject.

Perhaps it's lost in translation


Anyone out there that can help?

TohatsuGuru?

 

[pvanv]

Re: 1996 M140A2 Installing Blue Seas ACR Looking for Starter Isolation Location

That's the solenoid trigger. If that's what you want, cool.