1996 evinrude vindicator 200

BillyTrey37

Recruit
Thread starter
Joined
Sep 10, 2016
Messages
2
Good afternoon guys,
I've got a 1996 201 Pro XL Stratos with a 96' - 200hp evinrude vindicator. It does seem to be running at top speed. It's only running 47 mph at 5100 rpm's trimmed up.The motor is running smooth either at idle or full speed. Sometimes, when I first crank it, I can give it full throttle but she just won't come out of the hole and get up on the pad. Once it warms up a little, she does just fine and won't have a problem the rest of the day. Any idea where I should start to remedy this problem? Thanks for your help.
Go Dawgs!
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
What pitch prop are you running?. Your WOT rpm's are low on that unit. Either too much prop pitch, or something is going on in the powerhead.
 

BillyTrey37

Recruit
Thread starter
Joined
Sep 10, 2016
Messages
2
FYI I just got this boat and I'm still learning the in's and out's. It appears to have a 27 pitch Shooter 4 blade prop. I talked to a guy today and he seems to think it's in the carbs. I'm not a mechanic, so I have no idea.
 

daselbee

Commander
Joined
Jan 20, 2009
Messages
2,765
Whenever I see one that WAS RUNNING RIGHT, and then has suddenly lost 1000 rpms, I suspect that it has lost contribution of one cylinder.

If this fits your case, put new plugs in it, Champion QL78YC, gapped at 0.030, and run it. After 5-10 minutes, pull plugs and see if one still looks new...like it is not firing.

There are other ways, but this is sorta fool proof, just a 13/16 box end and your eyes needed, etc.

Don't drop a plug in the lake!!!!

This exact scenario happened to me on a 1996 200. Found #2 dead only AFTER QS dropped out, and it appeared to idle and run at speed just fine, except I had lost 1000 rpm.
 
Last edited:
Top