I just purchased a 1996 Bluewave 165 Super Tunnel that has a 96 Evinrude 88 SPL. I drained the old fuel and it started pretty easily. I took it out a few times now and I have a few questions. If they are a repeat to others already posted please forgive me.
1. At times it has trouble starting, needs some good throttle and choke to get it going. You think a CARB clean or rebuild would solve this? Does anyone know of a video tutorial of a rebuild on this setup? I am pretty confident mechanic but also very visual, I would like to watch someone else do it and then I bet I can run with it.
2. The boat that I am running it on is a pretty small one, 16 ft not really loaded down. When running @ WOT I get about 45 RPM's and 27mph. I think that the max RPM's on this motor is 5800 from what I have read. Any ideas for me to achieve better speed & RPM's?
3. Boat came with a trim/tilt gauge but it has never been hooked up, Do you know of a good article/resource that I can use to locate and connect the wires necessary to get this working?
4. What oil do you recommend running? I bought a gallon of the Royal Purple since I have had such good luck with the Royal Purple products in my Diesel engines.
5. When looking at a few other oil's I noticed that the mix ratio for 50:1 varied between the makers, Penzoil, Evinrude oil & Royal purple. Is this normal for each one to require different oil mixture to achieve the 50:1?
I have attached a small video of the boat running, it sounds good to me...
https://youtu.be/eRZhmB0Na1s
Thanks again for your help, any input would be appreciated.
1. At times it has trouble starting, needs some good throttle and choke to get it going. You think a CARB clean or rebuild would solve this? Does anyone know of a video tutorial of a rebuild on this setup? I am pretty confident mechanic but also very visual, I would like to watch someone else do it and then I bet I can run with it.
2. The boat that I am running it on is a pretty small one, 16 ft not really loaded down. When running @ WOT I get about 45 RPM's and 27mph. I think that the max RPM's on this motor is 5800 from what I have read. Any ideas for me to achieve better speed & RPM's?
3. Boat came with a trim/tilt gauge but it has never been hooked up, Do you know of a good article/resource that I can use to locate and connect the wires necessary to get this working?
4. What oil do you recommend running? I bought a gallon of the Royal Purple since I have had such good luck with the Royal Purple products in my Diesel engines.
5. When looking at a few other oil's I noticed that the mix ratio for 50:1 varied between the makers, Penzoil, Evinrude oil & Royal purple. Is this normal for each one to require different oil mixture to achieve the 50:1?
I have attached a small video of the boat running, it sounds good to me...
https://youtu.be/eRZhmB0Na1s
Thanks again for your help, any input would be appreciated.