1996 Evinrude 50 hp shifting issue

reach337

Recruit
Thread starter
Joined
Dec 6, 2015
Messages
4
I have developed a shifting issue with my motor. It is remote, and when I shift it into forward it starts to go, then there is a "bump" for lack of a better word, then it goes fine. It had now progressed to...When I shift it into forward, it's as if the gears don't want to mesh, but if you give it slightly more throttle, it engages and goes fine. There was an occasion where when it was engaged in gear, it would go, but it would bump bump bump like it had a miss almost, but I think it's a shifter issue. Thanks for your help.
 
Last edited:

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
You might want to drain the gear oil and see what it looks like.
 

reach337

Recruit
Thread starter
Joined
Dec 6, 2015
Messages
4
Drained it, it was a lil milky. Normal fine metal on the drain plug. Replaced gear oil, same issue.
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
40,028
Those gearcases are not all that robust.------In this case I would take it apart for inspection.---At least check the shift rod height.
 

Silvertip

Honorary Supreme Mariner
Joined
Sep 22, 2003
Messages
28,772
Disconnect the shift cable at the engine and have someone shift manually. If all works well there is a cable adjustment or wear issue in the throttle/shift box. If no change there is a lower unit problem.
 

reach337

Recruit
Thread starter
Joined
Dec 6, 2015
Messages
4
Praying it's an adjustment. A lower unit is as much as an engine!
 
Top