1996 9.9 information needed

[ChetW]

I have a 1996 Johnson 9.9 hp outboard model J10ELERB, serial # G 03654438. I have absolutely no information on what I have here. No owners manual, nothing.<br />I would like to know where I can get a manual for this motor. I would also like to know just what I have. 2 stroke or 4, shaft = long, x-long ?? I also have a set of controls but have no idea on how to hook them up. If this motor is an x-long shaft, can it be made into a long shaft. I want to use it on my sailboat as a kicker. It's in excellent shape, clean as a whistle. I just need all the info I can get on this motor. Please feel free to email me at, CWigleyjr@Earthlink.net with any info. Thank You

 

[JB]

Re: 1996 9.9 information needed

Hi, Chet.<br /><br />You need manuals; Owners and Repair. <br /><br />A Johnson Dealer can get you both, or you can get the Owner's Manual from him and a Repair Manual here:<br /><br /> http://www.outboardrepairs.com/manuals/ <br /><br />Good luck.

 

[seahorse5]

Re: 1996 9.9 information needed

According to the model number, your "1996" motor is actually a 1994 2-stroke long shaft. You will need a kit to install controls and look up the sailboat version of that motor in the parts book for the correct prop.<br /><br />Use the model number when you order the manuals.

 

[Solittle]

Re: 1996 9.9 information needed

And your homework is:<br /><br /> http://www.pugetsoundanglers.org/Fishing Info/Johnson 9.9_15.htm

 

[ChetW]

Re: 1996 9.9 information needed

Thanks to JB, Seahorse, and SoLittle for the info.<br /> Now, who can tell me where the battery cables hook up to the starter solinoid and the neg to the block. I have the full set of controls, ignition switch etc. but not sure where the batter cables hook up. Everything else seems pretty cut and dryed.<br />Thanks Shipmates,<br />Chet